Open Source High-Temperature Reprap for 3-D Printing Heat-Sterilizable PPE and Other Applications
Abstract Thermal sterilization is generally avoided for 3-D printed components because of the relatively low deformation...
Category Archives: Hardware
Order By
Share
Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers
Abstract Fused filament fabrication (FFF) is the most common and widespread additive manufacturing (AM) technique, but...
Share
The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids
Abstract While schools struggle financially, capital for purchasing physical learning aids is often cut. To determine...
Share
Open-Source Grinding Machine for Compression Screw Manufacturing
Abstract Some of the most promising distributed recycling and additive manufacturing (DRAM) technical systems use fused...
Share
Additively Manufactured Parametric Universal Clip-System: An Open Source Approach for Aiding Personal Exposure Measurement in the Breathing Zone
Abstract Design for additive manufacturing is adopted to help solve problems inherent to attaching active personal...
Share
Open Source Arc Analyzer: Multi-Sensor Monitoring of Wire Arc Additive Manufacturing
Abstract Low-cost high-resolution metal 3-D printing remains elusive for the scientific community. Low-cost gas metal arc...
Share
Exploiting open source 3D printer architecture for laboratory robotics to automate high-throughput time-lapse imaging for analytical microbiology
Growth in open-source hardware designs combined with the low-cost of high performance optoelectronic and robotics components...
Read the Paper
Share
A High Performance, Cost-Effective, Open-Source Microscope for Scanning Two-Photon Microscopy that Is Modular and Readily Adaptable
Two-photon laser scanning microscopy has revolutionized the ability to delineate cellular and physiological function in acutely...
Read the Paper
Share
NicoLase—An open-source diode laser combiner, fiber launch, and sequencing controller for fluorescence microscopy
Modern fluorescence microscopy requires software-controlled illumination sources with high power across a wide range of wavelengths....
Read the Paper
Share
Open-source micro-tensile testers via additive manufacturing for the mechanical characterization of thin films and papers
The cost of specialized scientific equipment can be high and with limited funding resources, researchers and...
Read the Paper